This and That

Random bits of my life

Posts Tagged ‘technique’

Pin Stitch Tutorial – Part 2

Posted by Avital Pinnick on August 14, 2009

In the first part, Pin Stitch Tutorial – Part 1, you learned how to start a thread with a pin stitch.

This part teaches you how to end a thread with a pin stitch. This, for me, is the best part because it makes “confetti” stitch embroideries (where you make a single stitch with a colour, end the thread, start a new colour, etc.). Making one or two stitches at a time with a single colour is extremely tedious and running the ends into the back of the piece can make it very bulky.

Most explanations of ending a thread with the pin stitch have you work the pin stitch underneath the finished stitch. This has two major disadvantages: the stitch becomes very thick with all that thread underneath (particularly if you have also begun the same stitch with a pin stitch) and when working on finer counts of fabric (36 count linen, 18 count aida), there isn’t much room to manoeuver the needle under the stitch. The stitch itself is easily pulled out of shape.

I believe this is my own innovation, to end the thread in a spot where it will be covered by another stitch, but not in a place where a new thread must be begun. This keeps the bulk of thread ends buried under the stitches to a minimum.

All photos are on my Flickr account. If you need to see a larger version, click the photo to go to the Flickr photo page. Click “All Sizes” to see the original size photo. All photos were taken with a Canon PowerShot S5.

Ending a thread with a pin stitch

1. Choose a stitch to end the thread. Remember that it must be a stitch where you will not be beginning a new thread, so the middle of a block or row of one colour is a good choice.

2. Bring the needle upwards, between two threads (or the center of the block, if using aida) at the bottom of the stitch.

Pin stitch end 1

3. Insert the needle down into the center of the block or the center of the two threads.

Pin stitch end 2

4. Pull the needle underneath so that the stitch is tightened. It should be a tiny stitch in the lower half of the square. I know it doesn’t look like much but it does do the job.

Pin stitch end 3

5. Bring the needle up in a nearby hole (it doesn’t matter which) and cut the tail flush with the fabric on the right side.

Pin stitch end 4

That’s it! Now you can start a new thread without having to turn your frame over, bury the ends, and so on.

Posted in embroidery, needlework, tutorial | Tagged: , , | 37 Comments »